Our Products

Get Started
A large pile of metal is sitting on top of pallets.
A pile of papers and other garbage in an area.
A large amount of trash is in the dumpster.
A blue machine is in the middle of a warehouse.
A large blue machine in a warehouse filled with papers.
A blue machine with some debris in it
A blue machine is in the middle of a warehouse.
A pallet of aluminum foil sitting in front of a building.
A blue machine is being loaded with wood
A blue machine is sitting on the ground
A large machine that is in the warehouse.
A large blue machine in a warehouse with a conveyor belt.

Full Eject Series

The Full Eject Series was specifically designed for low volume users with the possibility of baling a wide range of materials. NF4560-1050.

Full Eject Series Specifications

Production Volume: Up to 12,800 Cubic feet / Hour
Feed Opening: 35″ x 57″ or 45″ x 57″
Cycle Time: Min. 29.4 secs. Max. 20.9 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 30″h x 45″l x 60″w

PAC Series Horizontal Baler

American Balers PAC Series horizontal baler was designed for use in printers, box plants, document destruction, textile and etc. Material can be air conveyed or mechanically conveyed. Our PAC Series produces a mill or export size bale from material that is primarily either trim, shredded or die cuts.

PAC Series Specifications

Production Volume: Up to 20,000 Cubic feet / Hour
Feed Opening: Min. 30″ x 27.5″; Max. 50″ x 27.5″
Cycle Time: Ranges from 7.0 secs. to 28 secs.
PSI: Up to 150,795# of force
Expanded Bale Size: 30″w x 43″h x var. l
Production Capacity: Range – 1 TPH to 15 TPH

A large blue machine is in the middle of a room.
A large machine that is used to sort paper.
A large blue machine is loading cardboard into the warehouse.
A machine that is cutting paper into smaller pieces.
A warehouse filled with stacks of garbage next to each other.
A factory with many yellow and white floors
A large warehouse with a pallet stacker and pallets.
A large machine that is in the middle of a room.
A large machine that is in the middle of a room.
A conveyor belt in an industrial setting with windows.
A large machine that is in the middle of a warehouse.

29N Single Ram Series Baler

The 29N Single Ram Series baler was designed for applications where tough materials like single/double/triple wall OCC shreds and trim, DLK, signatures, plastics and beverage cans are being baled and maximum bale density is required. These 29N Series balers are available with or without a shear blade and can be conveyor fed or fed with an air conveying system.

29N Series Specs

Production Volume: Up to 17,650 Cubic feet / Hour
Feed Opening: 50″ x 27.5″
Cycle Time: Ranges from 9.5 secs to 26.2 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 30″ x 43″ x var.
Production Capacity: Range – 3 TPH to 16 TPH

DC Balers

Specifically designed for Distribution Centers. The DC Balers were designed specifically for facilities who handle whole upright boxes. We also have the 42WS Series that can handle flattened corrugated boxes. The DC Balers can be used with shredders in high volume applications.

DC Baler Specs

Production Volume: Up to 31,350 cubic feet / hour
Feed Opening: Min. 50″ x 43″ up to Max. 75″ x 46.5″
Cycle Time: Min. 28 secs. – Max. 8 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 43″ x 43″ x var. up to 43″ x 48″ x var.
Production Capacity: Min. 2 TPH up to 20TPH

A large stack of cardboard boxes in a warehouse.
A blue machine is loading wood into the truck.
A warehouse with a large amount of boxes on the floor.
A warehouse with boxes and other items on the floor.
A large building with a yellow fence around it.
A large stack of cardboard boxes in an industrial warehouse.
A large warehouse with many stacks of bricks.
A trailer with many wooden planks on it
A warehouse with blue and yellow equipment.
A warehouse with boxes and pallets on the floor.
A warehouse with a large machine and lots of boxes.
A large blue machine in a warehouse with yellow gate.
A machine that is in the warehouse with boxes.
A warehouse with stacks of boxes on the floor.
A large blue machine in a warehouse.
A large warehouse with a machine in it
A large machine that is in the middle of a warehouse.
A person is working in an industrial warehouse.
A green machine is in the middle of a room.

42W Series Single Ram Horizontal Baler

42W Series single ram horizontal balers are designed for small to medium sized MRF’s, Transfer Stations, Paper Brokers, and Printers / Converters. The 42W Balers are also used in Distribution Centers for set-up and flattened cartons since the wide mouth feed openings are ideal for these applications. The 42W Balers are available with three different feed opening sizes, three cylinder sizes, and six motor HP sizes and each of these models is available with or without shear blades. This makes the 42W Balers ideal for these baling applications.

42W Baler Specs

Production Volume: Up to 28,000 Cubic feet / Hour
Feed Opening: Min. 50″ x 40.5″; Max. 72″ x 40.5″
Cycle Time: Ranges from 8.8 secs to 27.5 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 43″ x 43″ x var.
Production Capacity: Range – 5 TPH to 25 TPH

43HS Balers

The 43HS Balers are designed for medium to large sized MRF’s, Paper Brokers. Handles OCC, printers mix, Office Paper, Newspaper, Plastic and light aluminum. With a 43 x 43 cross section the 43HS Balers will maximize bale weights with high production thru-put numbers.

43HS Baler Specs

Production Volume: Up to 38,000 Cubic feet / Hour
Feed Opening: Min. 54″ x 43″; Max 73″ x 43″
Cycle Time: Ranges from 9.1 secs to 24.1 secs
PSI: Up to 339,290# of force
Expanded Bale Size: 44″ x 44″ x var
Production Capacity: Range – 7TPH to 50 TPH

A large blue machine in a warehouse.
A bunch of bales of hay stacked up in the middle of a building.
A warehouse filled with lots of cardboard boxes.
A blue and yellow machine is in the middle of an industrial area.
A large machine that is in the warehouse.
A pile of white paper is being shredded.
A conveyor belt with boxes of cardboard in it.
A large blue and yellow machine in a warehouse.
A large blue conveyor belt in a warehouse.

Automatic Baling Machine

American Baler builds the single ram automatic baling machine with the following features that are suitable for most paper recycling applications.

If you are a paper or plastic recycler American Baler will have a single ram automatic baling machine that will meet your needs. Plus we offer the best baler warranty in the business!

  • Several charge box opening lengths
  • 29”, 42” 43” and 48” charge box widths
  • 7”, 8”, 9” 10”, 11”, & 12” cylinder bore sizes for additional bale density and shearing force
  • 9 power unit sizes for faster ram speed and additional hourly production
  • E-PAC TEFC Motor 460/3/60 – XL Starting
  • IEC Componentry
  • NEMA -12 Electrical Enclosure
  • UL & CUL Listed Electrical Components
  • Allen Bradley CompactLogix PLC with 10″ Touchscreen operator interface
  • Pushbutton Controls
  • Infrared Cycle Control
  • Single electrical panel on 30HP models
  • Thermostatically controlled Air-to-Oil heat exchanger
  • Trunnion Mounted Main Cylinder
  • Manifold Hydraulics with Regen Circuit
  • 10 Micron filtration with replaceable filter element
  • Replaceable tank breather filter
  • Single Cylinder Bale Tension System with 4-Way Free Floating Design
  • Bushed tension links with grease fittings (10” models only)
  • Swing-Away Hydraulic 5-Wire Auto-Tier Mounted on Poly-Clad Wheels
  • Box Type (Fixed) 100# Wire Holders
  • Replaceable Hardox 500 Floor Liner
  • Feed Chute w/Gasketed Door & Window
  • Oil heater
  • 3HP conveyor controls
  • High level infrared
  • Hot Oil Indicator & Shutdown
  • Low Oil Indicator & Shutdown
  • Remote VPN Internet Access
  • 4′ Bale Run-out Table
  • Adjustable Dust Seals on Platen Sides & Top
  • 8 Spring Loaded Retainer Dogs (4 each side)
  • 3-Stage Bolt-in Serrated Shear blade (if applicable)
  • Anchor clips
  • Surface is painted with an industrial primer and 2 coats of industrial enamel
  • Category 3 Compliance

OCC – High Production Horizontal Baler

American Balers model 8072HSL-11225 horizontal baler is designed with a big 80″ x 72″ feed opening to handle bulky OCC fed from any direction with one or more conveyors. The 8072HSL-11225 with a high speed side ram bales more material per ram stroke resulting in increased OCC hourly production and produces an “export” bale size that can be easily loaded into sea containers.

8072HSL-11225 Specifications

Production Volume: Up to 47,000 cubic feet per hour
Nominal Feed Opening: 80″ x 72″
Maximum Ram Force: 332,620#
Expanded Bale Size: 44″ x 44″ x var
OCC Production Capacity: up to 30 TPH

A machine in a factory with pipes and walls
A warehouse filled with stacks of white paper.
A man standing next to boxes in a warehouse.
A large machine that is in the warehouse.
A large machine that is in the middle of a room.
A large blue and yellow machine in a warehouse.
A large blue machine in a warehouse.
A blue and yellow loading dock with stairs going up.
A blue machine with several stacks of metal parts.
A large blue machine in a warehouse.
A large blue machine in a warehouse.
A large machine in the middle of an industrial area.
A machine that is sitting in the middle of a room.
A machine that is sitting in the middle of a room.
A large machine in a warehouse with a yellow door.
A large blue machine with cardboard in it.
A person standing next to a large blue machine.
A large machine that is in the middle of a warehouse.
A warehouse filled with lots of metal.

WB Two Ram Baler Series

Our Wide Box Two Ram balers offer an economical solution for paper brokers and recyclers who have multiple grades that need to be baled. The WB Series is available with 6′ and 8′ feed opening lengths and multiple HP options.

WB Series Specifications

Production Volume – Up to 39,055 Cubic Feet per Hour
Feed Opening – Up to 96″ x 86″
Cycle Time – As quick as 10.2 seconds (no-load)
PSI – Up to 279 or 452,389 lbs of force
Expanded Bale Size – 30″ x 45″ x 60″ The 45″ dimension can vary.
Bale Weights (Avg) OCC – Up to 1400#
ONP- Up to 1800#
UBC – Up to 1100#
Production Capacity – Up to 20 TPH of OCC

NB Two Ram Baler Series

The NB Series Two Ram baler is specifically designed to be a versatile machine that can handle multiple grades of material. The NB Series gives the operators the ability to have different setups for baling wire to be placed around the bale to hold memory retentive material. The NB Series baler allows for multiple grade setups for baling multiple grades.

NB Series Specifications

Production Volume: Up to 21,430 Cubic feet / Hour
Feed Opening: Min. 65″ x 43″; Max. 90″ x 43″
Cycle Time: Min. 27.6 secs. Max. 11 secs.
PSI: 235,615# of force
Expanded Bale Size: 30″h x 60″l x 45″w
Production Capacity: Range – 3 TPH – 19 TPH

A large machine that is dumping paper into the ground.
A yellow truck parked next to a pile of cardboard.
A large box of cardboard on top of a truck.
A large amount of garbage is being shredded.
A large amount of aluminum cans are stacked on top of each other.
A large pile of plastic bags on top of a cart.
A large box of stickers is being loaded onto a truck.
A large amount of aluminum cans are being unloaded.
A large blue conveyor belt in a room.
A large blue conveyor belt with many different types of trash.
A large blue machine in a warehouse with yellow equipment.
A large metal box sitting on top of a machine.
A green machine in an industrial setting with stairs.
A large yellow machine in an industrial setting.
A wall of computer monitors wrapped in plastic.
A blue and yellow machine is next to cardboard boxes.
A blue machine is next to a pile of trash.
A yellow truck parked next to a pile of cardboard.
A large machine that is cutting cardboard.
A stack of cardboard boxes that are stacked together.
A large amount of aluminum cans are stacked on top of each other.
A pile of white yarn in a warehouse.
A man is working on a dumpster full of trash.
A large machine that is dumping paper into the ground.
A large blue machine is in the middle of a warehouse.
A stack of plastic bags in a warehouse.
A large blue machine with cardboard on top of it.
A large blue machine in a warehouse filled with trash.
A large machine that is in the middle of a room.
A machine that is sitting in the middle of a room.
A large blue machine in a warehouse.
A large blue machine in a warehouse room.
A blue conveyor belt in an industrial setting.

Two / 2 Ram Baler

American Baler builds two ram baler models that are suitable for most paper, plastic and non-ferrous metal baling applications.

If you are a paper, plastic and/or non-ferrous metal recycler American Baler will have a two ram baler models that will meet your needs. Plus we offer the best baler warranty in the business!

Two Ram Baler Features

  • Available with either a 43” wide frame or 60” wide frame
  • Several charge box opening lengths
  • Single side sheet construction
  • Meets all Current ANSI Z245.51 Safety Standards
  • Allen Bradley IEC components
  • EPAct TEFC Motors 460/3/60 – X Line Starting
  • Sequenced motor start-up with Economizer to shut down motors when not in use
  • Allen Bradley CompactLogix PLC
  • Panelview Touchscreen operator interface
  • Across-the-line conveyor motor starter (up to 10HP) and controls to optimize production
  • UL Approved NEMA 12 Electrical Enclosures
  • Operator controls mounted in MCC
  • Dual Infrared Cycle Control (Diffused)
  • Laser positioning
  • Pressure Transducer
  • Remote VPN Internet access
  • Left hand or right hand eject available
  • Manifold hydraulics with Regen
  • Hi-Lo vane pumps
  • Versa-Door w/transducer
  • Dual Infrared Cycle Control (Diffused)
  • Shimmable Serrated AR Shear Blade
  • Shear Beam Mounted at 9° Rake
  • Trunnion mounted main and eject cylinders
  • Full Main Ram Penetration
  • Hopper Access Door w/Safety Switch
  • Adjustable ram hold down bars
  • High/Low Floor
  • Replaceable Hardox 500 Floor and Ram Liner Strips alternating ½” to 1”
  • Replaceable ¼” Hardox 500 charge box side liners and press box side and top liners
  • Replaceable Hardox 500 Platen Strips
  • Bale table to support ejecting bale
  • Air-to-oil cooler
  • Tank Heater
  • Hot & Low Oil Shutdown
  • Accent 470 Wire Tier
  • Dust Cover for Wire
  • 1 – Stem of Galvanized Wire (11 or 12 Ga.)
  • Surface is painted with an industrial primer and 2 coats of industrial enamel
  • Anchor clips
  • Optional 12.4 or 18.8 ton hydraulic stamper at shear
  • Optional Plastic Strapper
  • Category 3 Compliance

If you are non-ferrous metal recycler American Baler will have a two ram metal baler model that will meet your needs. Plus we offer the best baler warranty in the business!